Why Driveway Pavers Need a Concrete Slab
A driveway carries cars every day. On Melbourne's clay ground, pavers laid only on sand and crushed rock can rut and sink under the wheels. That is why we lay driveway pavers on a new reinforced concrete slab.

What goes wrong without a slab
Cars turn, brake and park in the same spots. Over time the weight pushes the base down, and the pavers sink in two lines where the wheels go. On clay soil, which moves between wet and dry seasons, it happens faster.
How we build a driveway on a slab
- Dig out the old driveway and soft soil.
- Compact a crushed-rock sub-base.
- Set out reinforcement mesh and formwork, with falls away from the house and garage.
- Pour the concrete slab and let it cure.
- Lay the pavers (brick, bluestone or concrete pavers) on a mortar bed, with neat cuts and edges.
- Grated drain at the garage door where needed, then joint, clean and seal.
How much does it cost?
Driveway pavers on a new reinforced concrete slab usually cost $330–$375/m² including GST. Bluestone on a slab is higher. A 40m² brick driveway on a slab is roughly $13,200–$15,000. Try our cost calculator for your size.
Is it worth it?
For a driveway, yes. It costs more than a sand-and-rock base, but it doesn't need lifting and re-laying every few years, and it looks right for decades. For paths and patios that only carry people, a well-compacted crushed-rock base is usually enough.
Council permits
A new or wider vehicle crossing at the street needs a council permit. If you are building a new home, check how much hard surface your permit allows. We check both at the site visit.
Related
Frequently Asked Questions
Do driveway pavers need a concrete base?
For driveways in Melbourne we recommend it. A reinforced concrete slab stops pavers sinking and rutting under cars, especially on clay ground.
How much does a paved driveway on a slab cost?
Usually $330–$375/m² including GST for brick or concrete pavers on a new reinforced slab.
Can you lay pavers over my old concrete driveway?
Sometimes, if the old slab is sound, level and the height works at the garage and street. We check this on site.
How long does it take?
Most driveways take one to two weeks, including time for the slab to cure before paving.
What Melbourne Homeowners Say
⭐ 5.0 Google · 72 reviews · $20M insured · 1‑year workmanship warranty
Antonio completed our bluestone paving in Hampton and the result is outstanding. The levels, drainage and finishing details are flawless. Highly recommended for high-end paving.
We had a fairly complicated drainage issue on the site, but Antonio came up with a solution and executed it perfectly. The workmanship was top quality, and there were no unexpected surprises along the way.
Antonio runs a very professional small business. Friendly, punctual and hard working. Built 2 retaining walls and remodelled our driveway paving. Would use Antonio's service again.
Antonio and his colleague did a great job with our backyard brick laying. Easy to deal with, on time and professional.
Antonio just completed some brick paving alongside our front fence. The paving looks fabulous and was completed in 2 days. He was reliable and the work was completed to a high standard.
Antonio cleared out our small backyard, laid some pavers and built a step around our existing deck. He was quick to respond, well priced, and was happy to change and vary the scope of works as needed.
Get a Free Written Quote
Send a few details and photos. Antonio will reply the same day (Mon–Sat).


