Driveway Paving Melbourne
Brick, concrete and bluestone paver driveways built on a heavy-duty compacted base with proper edge restraint, so they carry cars for decades without sinking or spreading.
We supply and install, or install stone you've already bought.
Text photos and rough sizes. You get a rough price the same day (Mon–Sat), then a free visit to confirm.
Recent jobs
What Goes Into a Paved Driveway
A driveway carries a lot more weight than a path. These photos from our own jobs show the work that happens before the pavers go down.
Why Pave Your Driveway
Carries the load
A deep, compacted crushed rock base and edge restraints stop pavers sinking or spreading under cars.
Herringbone interlocks
The herringbone pattern resists the twisting of turning tyres better than any other.
No big cracks
Unlike a poured slab, pavers flex slightly with the ground instead of cracking across the driveway.
Easy to repair
Stained or damaged pavers, or ones over plumbing, can be lifted and relaid.
Street appeal
Brick and bluestone driveways lift the look of the whole property.
Driveway Options
We'll bring samples and talk through options at your free quote.
Brick or concrete pavers
The most popular choice, herringbone pattern with a soldier-course border.
Best for: most homesPlain or exposed concrete
A poured slab is the most budget-friendly option. See .
Best for: budget and long drivewaysPermeable pavers
Pavers with open joints that let stormwater soak in, where councils require it.
Best for: new builds, council requirementsDriveway Paving Cost in Melbourne
Most driveway paving jobs we quote cost $330–$375 per m² supplied and laid. A typical 20m² job, including demolition, base preparation and clean-up, usually lands around $6,600–$7,500.
Where your job lands in that range depends on:
- MaterialConcrete pavers at the lower end; clay brick and bluestone higher.
- DemolitionBreaking out and removing an old concrete driveway.
- Base depthSoft or reactive clay ground needs a deeper base.
- Crossover and councilWork at the kerb and any council requirements.
- Borders and cutsSoldier-course borders, curves and pits add time.
| Service | Price Range | Notes |
|---|---|---|
| Brick Paving | $175–$200/m² | Clay or concrete pavers, herringbone or stretcher bond |
| Recycled Brick Paving | $195–$240/m² | Reclaimed red brick, sorted and cleaned before laying |
| Bluestone Paving | $220–$265/m² | Sawn, honed or natural split finish |
| Travertine Paving | $310–$350/m² | Tumbled or honed, French pattern or herringbone |
| Porcelain Paving | $200–$270/m² | Large-format, anti-slip rated tiles |
| Pool Paving | $230–$330/m² | Anti-slip rated, includes drainage falls |
| Patio Paving | $175–$350/m² | Pavers, bluestone, travertine or brick |
| Driveway Paving | $330–$375/m² | Brick, concrete or bluestone pavers on a new reinforced concrete slab |
| Crazy Paving | $285–$330/m² | Limestone, sandstone, bluestone or flagstone |
Try our paving cost calculator for your size. These are guide prices only (inc GST). Every job is different. Your price depends on the size, access, base, drainage and material you choose, so it can come in lower or higher. Send photos and rough measurements to 0406 170 544 for a rough price first, then we visit for free and give you a fixed written price.
Brick Driveways in Melbourne
A brick driveway, clay or concrete pavers laid in herringbone on a deep, compacted base, is one of the most durable and repairable driveway surfaces you can choose. Herringbone locks the pavers together so they resist creeping under turning cars, and if a section ever settles or needs plumbing access, it can be lifted and relaid instead of cut out like concrete.
Brick driveways laid on a new reinforced concrete slab cost $330–$375/m² (inc GST), so a 40m² brick driveway is about $13,200–$15,000. The slab is what stops a driveway sinking under cars. Compare the options in our brick vs concrete driveway guide, or see brick paving for colours and patterns.
How We Build a Paved Driveway
- Break out & excavateOld driveway removed and excavated to the depth needed for vehicle loads.
- Heavy-duty baseCrushed rock compacted in layers, deeper than a path because it carries cars.
- Edge restraintConcrete edges so the pavers can't spread under the weight of turning cars.
- Lay, joint & compactHerringbone laid, joints filled and the surface compacted in.
Driveway Paving Across Melbourne
Based in Notting Hill, see all 80 suburbs we service.
Paver and Brick Driveways in Melbourne’s Eastern Suburbs
Most of the driveways we build are in Melbourne's eastern suburbs, inner east and bayside, paver driveways, brick driveways and brickwork borders laid on a deep, compacted crushed-rock base with firm edge restraints. Herringbone suits driveways best because the pavers lock together under turning cars.
Paved driveways are $330–$375/m² and brick $175–$200/m² including GST. Every driveway gets a fixed written quote after a free site visit.
Driveway Paving in Your Suburb
From our base in Notting Hill we work within 25 km, across Melbourne's east, inner east, south-east & bayside.
What Melbourne Homeowners Say
★ 5.0 Google · 72 reviews · $20M insured · 1‑year workmanship warranty
Antonio completed our bluestone paving in Hampton and the result is outstanding. The levels, drainage and finishing details are flawless. Highly recommended for high-end paving.
We had a fairly complicated drainage issue on the site, but Antonio came up with a solution and executed it perfectly. The workmanship was top quality, and there were no unexpected surprises along the way.
Antonio runs a very professional small business. Friendly, punctual and hard working. Built 2 retaining walls and remodelled our driveway paving. Would use Antonio's service again.
Antonio and his colleague did a great job with our backyard brick laying. Easy to deal with, on time and professional.
Antonio just completed some brick paving alongside our front fence. The paving looks fabulous and was completed in 2 days. He was reliable and the work was completed to a high standard.
Antonio cleared out our small backyard, laid some pavers and built a step around our existing deck. He was quick to respond, well priced, and was happy to change and vary the scope of works as needed.
Read our guide: Why driveways need a slab.
Planning a big driveway project?
Whole yards, long driveways, pool areas and full-property paving, planned as one job with one fixed written price paid in stages. Send plans or photos and we'll give you a rough price before we visit.
Driveway Paving: FAQ
Do you use grout or polymeric sand in the joints?
It depends on the job. Stone laid on a mortar bed, crazy paving, and bluestone or travertine around pools and patios, usually gets grouted joints, which are firm and easy to keep clean. Pavers laid on a compacted sand and crushed-rock base, like brick and concrete pavers on driveways and paths, get polymeric sand, which sets firm, stays slightly flexible and helps keep weeds and ants out. We recommend the right one for your area on the site visit.
How much does a brick driveway cost in Melbourne?
Brick driveways are typically $330–$375/m² laid (inc GST), including a new reinforced concrete slab under the bricks; a 40m² brick driveway is about $13,200–$15,000.
What is driveway paving?
Driveway paving uses brick, concrete or bluestone pavers laid over a deep, compacted crushed rock base with concrete edge restraints, so it can carry vehicle loads without sinking or spreading. Unlike a poured concrete slab, individual pavers can be lifted and relaid if needed.
How much does driveway paving cost?
Most paved driveways we quote cost $330–$375 per m² supplied and laid, and a typical 20m² area usually lands around $6,600–$7,500. Demolition of an old driveway, base depth and the pavers you choose all affect the price. Every quote is free and confirmed in writing.
How deep is the base under a paved driveway?
Driveways sit at the deeper end of the 100–150mm of compacted crushed rock most Melbourne jobs need, and soft or reactive clay ground can need more. We confirm the base depth for your site in the written quote.
Pavers or a concrete driveway?
Pavers cost more than a plain slab but won't crack across the driveway, can be repaired paver by paver, and look better. Concrete is the budget option, see our concrete driveways page.
Which pattern is best for a driveway?
Herringbone. The pavers interlock, so they resist the twisting forces of turning tyres far better than other patterns.
Do you provide free quotes?
Yes. Call 0406 170 544 or use the form below with photos and rough measurements, and Antonio will send you a rough price first, then visit for free to confirm a fixed written price.
Are you insured?
Yes, ABN registered (39 104 568 456) with $20M public liability insurance. Certificates are provided with every written quote.
Guides for Your Project
Ready to Start Your Driveway Paving Project?
Send a few photos and rough measurements for a rough price, usually the same day (Mon–Sat). Then a free site visit and a fixed, written quote from Antonio.
Prefer to talk? Call Antonio directly: 0406 170 544
